Change a Propane Tank
Forklifts fueled by propane are common inside warehouse environments. These forklifts have a propane mount situated at the back of the driver. These tanks have to be replaced from time to time as they have limited lifespans. Drivers of forklifts must utilize care when handling propane tanks. Compressed gases are dangerous, specially since the gas is flammable. Always utilize care when replacing and removing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This process burns off the gas inside the transfer hose that connects the tank and the engine. Prior to taking the second steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is essential for you to protect your skin from touching the compressed gas, that is extremely cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, reattach the holding straps and reattach the hose at the valve of the tank by tightening the nut.
3 You can check for leaks by applying soapy water to the valve and opening it slightly. Leaking gas would cause bubbles to foam around the value. If this occurs, inspect the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and afterward do the leak checking procedure once more. Persistent leaks mean that both the nut and connecting hose should be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. After that you can start the lift truck and resume operating.