In the majority of cases, most individuals spend quite a lot of money buying their lift truck. Therefore, it is extremely important to take proper care of it in order to protect your investment well into the long run. It is really a good idea to know the procedures that are undertaken in the maintenance and care of this piece of machine.
By starting up the forklift and listening closely how it works is one of the best ways to tell how good the engine is running. For example, if there are any knocks or misses, the machine is faulty and this should raise some concerns. Also listen carefully for any squealing noise which come from the belts because these noises will provide you with a lot of information.
When performing maintenance, several of the main components you will have to pay attention to comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals must be cleaned when the above components have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each cell of the battery should be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The transmission filter, fuel filters and the hydraulic filter should be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. After that, inspect every other component of the machinery like the wheels. If any kind of concern or fault is detected, be sure to address it immediately so as to make certain the equipment is running at its safest and optimum levels.