In the late 1990's, a Nissan Propane Forklift would have cost approximately $11,000 to $14,000 to buy a brand new one. You are now able to buy a second-hand model with this amount, with fewer than 5,000 operating hours and has about 15 feet of lifting capacity and cushion tires. On the other hand, a second-hand Nissan forklift truck that has less than 5,000 hours could be found for less than $7,000. This alternative may be a little bit of an older unit than some others, but bear in mind; everything revolves around the operating hours. A model like this will probably have a fairly good load capacity of approximately 5,000 pounds.
Newer Nissan forklifts from the year 2005 to the current year, can be found priced near $10,000. Normally, these units would have a standard lift capacity ranging from 4,000 to 5,000 lbs. Normally, a model similar to this would have cushion tires and run smoothly. Of course, newer models generally run smoother compared to older ones.
Types of Forklifts
The lift truck is usually categorized in 2 separate manners: by the structure of the lift truck and the type of fuel it takes. Based on structure, the following types of lift trucks are amongst the most common:
Standard Forklift: Standard lift trucks comprise the familiar warehouse forklift. These forklifts offer a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of about 20 feet.
Reach Forklift: Usually known as a narrow aisle lift truck, the reach forklift is the kind of machinery that is found within warehouses and distribution centers where space is at a premium. Narrow construction means that it is not able to lift as much as a typical lift truck model, however, it has an extendable mast that can easily carry loads roughly 40 feet.
Telescopic Forklift: Telescopic lift trucks are also referred to as telehandlers, extendable reach forklifts or a telescopic handler. These types lift truck trucks are a more rugged and heavy-duty version of a typical forklift. These units provide a telescopic boom which can be extended out and raised up. Often, these units are used on rough terrain. They could handle loads up to 70 feet high and could move loads weighing over 30,000 pounds. handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most normally used to perform tasks on rough terrain. These kinds of forklifts are only capable of moving loads vertically, unlike a telescopic unit. These units can raise loads up to 12,000 lbs, while reaching a height of 10 to 30 feet.